| |
|
| |
 |
3B30-2
Highway Block/FTP-2 Female Connector
The 3B30-2 Block is provided with three #10/1 wires to tap into
existing underground power. A 10/2 cable is molded into the block
and exits opposite the 10/1 wires. The 10/2 cable is terminated
with a red FTP-2 female connector, which mates to the Surge Arrestor
cable assembly. The molded block has one three-wire outlet for the
fused distribution cable assembly.
|
| |
|
|
| |
 |
3MFP-5
Fused Cable Assembly
The Fused Cable Assembly includes a male 3MFP-5 fused plug molded
to 14/3 cable. The other end is terminated with an orange female
FTP-3 connector which mates with the MTP-3 Cable Assembly for Pole.
The fused plug mates with the 3B30-2 Block.
|
| |
|
|
| |
 |
MTP-2
Male Surge Arrestor Cable Assembly
The MTP-2 Male Plug is molded in red to 10/2 cable and is terminated
with a surge arrestor. The MTP-2 plugs into the FTP-2 connector
on the Fused Distribution Cable Assembly.
|
| |
|
| |
| MTP-3
Male Cable Assembly for Pole
The MTP-3 Male Plug is molded in orange to 14/3 cable. The MTP-3
plugs into the FTP-3 connector on the Fused Cable Assembly.
|
| |
|
|
| |
 |
M182700 Connector Maintenance Kit
This kit includes all the materials need to maintain all Duraline
connectors as well as our Lighting products.
Maintenance
Kit Contents
(1)
Can of Electrical Contact Cleaner
(1)
Can of Silicone Spray Lubricant
(1)ea
1/4”, 3/8", 1/2", 1" diameter Nylon Tube Brush
(1)
Sheet of Fine grit Emery Cloth
 |
| |
|
|
| |
 |
A243100
Replaceable Pin 30 Amp Max Orange
The 1/4" replaceable pin that came with your fuse plug should be
checked regularly and replaced whenever there is wear or damage.
Failure to replace damaged or worn pins void its IP68 Rating.
Kit
Includes (1) Molded Pin
|
| |
|
|
| |
 |
A006051
Pin Removal Tool
This tool allows for quick removal and installation of replaceable
pins. Used on all
Duraline Male Fused Plugs.
Kit Includes (1)
Removal Tool
|
| |
|
|
View Cart
