E1016 E-Z1016 Series -  E1017 Series - E1023 Series Cam Lok® Connectors

Duraline's Taper Nose “J” Series In Line Latching Single Pole Cam Type Connectors are designed for quick, safe positive power connections. High conductivity with low resistance is assured through connections that lock tight and stay tight, yet can quickly and easily connected and disconnected without the need for tools. As the original manufacturer of the cam-lok style positive latching connector and receptacles, we have been supplying shipyards for over 50 years and our connectors are the standard used by all navy facilities and shipyards both in the United States and abroad. Our connectors have been thoroughly tested and field proven to be the finest available. These locked connectors are impervious to vibration and will not twist loose from cable flexing. All this while maintaining a highly conductive fit, allowing the connections to run cool.

E1018 E-Z1018 Series -  E1019 Series - E1022 Series Cam Lok® Connectors

Duraline's Ball Nose Series Single Pole Cam Type Connectors, are the original watertight connector chosen by US Navy and major OEM providers of welding equipment. The efficient "ball-nose" design provides a splash-tight seal. These reliable connectors have been used for years in shipyards construction sites and power plants. "Ballnose" Series Single Pole Connectors are easily inter-connectable with existing distribution block and systems with the "ballnose" design. Available in both "molded to" and "field attachable" versions.

New  Duraline Single Pole Cam-Lok Connectors with Rubber Molded Insulating Sleeves. Features new Contact design that eliminates the possibility of contact rotation within the molded insulating sleeve with a minimum of 700 lbs shear force. Built to meet and exceed the Department of the Navy OPNAVINST 11310.3B Specifications.

Rated 600 volts 690 Ampere 60 Hertz Continuous Duty Operation. Termination Types Include Single Crimp Style, Solder, Single Set Screw and Double Set Screw. , UL94 VO Rated, Durometer ASTM D 2240, 55 - 65A

Section Includes;

• Ball Nose Rubber Molded Field Attachable Clamp Type and Tapered end Styles OPNAV 11310.3B
• Tapered Nose Molded Field Attachable Clamp Type and Tapered end Styles OPNAV 11310.3B

Duraline's Polarized Long Shroud Single Pole In Line  Positive Latching Cam Type Connectors
Rated 690 amperes continuous, 1150 amperes intermittent 750 Volts AC/DC. Single Pole In Line Latching Cam Type Connectors.

These connectors achieve positive connections through a unique latching design. High locking pressures are developed, yet unlocking is quickly accomplished by depressing an insulated, external button. There are no external metal parts and no tools needed to connect or disconnect. Both male and female connectors are protected by a long shrouded style insulating sleeve. The long shrouded insulating jacket extends past both male and female contacts, for total insulation. Insulators are available in several colors for phase identification. Typical applications include motor connections, generators, power panels and ship to shore systems. Polarized contacts have a male keyway and female pin that prevent mis-phasing of power connectors.

Cooper Interconnect's single conductor ROUGHNECK High Amperage Connectors are specifically designed for oil drilling applications. Also use these heavy-duty connectors to safely carry power from generators to switch gear or to SCR packages to tractrion motors, including mud pumps, draw works, rotary tables, cement pumps and other offshore applications. Weatherproof and practically indestructible under the most extreme working conditions. ROUGHNECK E1049 Series connectors offer a margin of safety and reliability unavailable until now. These connectors are built to take heavy abuse, resistant to wind, rain, mud, oil and sea water, yet they can be quickly connected and disconnected without any tools. ROUGHNECK E1049 Series plugs and receptacles provide the safest high amperage connectors in the industry. Rated 1000 Volts up to 1135 amperes continuous with intermittent surges up to 1300 amps.

Section Includes;

• Crouse-Hinds E1049 Series Roughneck Male and Female Connectors, Crimped or Soldered Connections, for 313 MCM through 777 MCM Cable Applications.
• Crouse Hinds E1049 Series Roughtneck Male and Female Receptacles, for 313 MCM through 777 MCM Cable Applications.
• Repair and Accessory Items for ROUGHNECK E1049 Series High Amperage Connectors.

The Posi-Lok Power Distibution System from Cooper Interconnect brings a new level of safety to electrical applications. Now there's no need to haul around python sized, multi-conductor cables. Posi-Lok Power Distribution Systems let you use lighter, single conductor cables rated at higher amperages. Designed to meet Article 520-53 Section K and Article 530-22 Section A (NEC) standards, Posi Lok's built-in safety features require the user to connect or disconnect each plug in sequence. Protective covers cannot be raised until the preceding plug is locked into position. The disconnect sequence is reversed. The same plugs that connect to panels also connect to each other so that you can use long runs of cable. Polarity is assured because each plug is uniquely keyed and color coded for easy, positve connecting. Posi-Lok plugs feature recessed electrical contacts that are protected by shatter-resistant synthetic rubber insulators and impact-resistant molded sleeves.

Posi-Lok Systems are used indoors and outdoors and can be used for connecting standby power generators and load testing equipment in hospitals and in heavy industrial environments

Section Includes

• Crouse-Hinds Posi-Lok E0200 
• Crouse-Hinds Posi-Lok E0315 
• Crouse-Hinds Posi-Lok E0400 

Don't have a vulcanizer, hydraulic crimper or installation tools or you just want to make sure your Cam Lok Single Pole Connectors are professionally installed. Duraline has been installing Cam-Lok connectors to cable for over 40 years. We stock most sizes of type SC, W, DLO and THOF cables.

Our cable assemblies are used for Shipyards, Generator sets standby power, hospitals, Stage power, Wind Turbines, Heavy industrial applications, constructions, Oil Drilling Applications, Electric power plants and Vineyards to name a few.

We also offer molded crotch assemblies on larger 3 conductor cables and molded donuts to keep 4 and 5 wire assemblies neat. Below you will find some standard products call us to quote your custom cable sets.

Duraline only installs the Duraline Cam-Lok and Cooper Interconnect Crouse-hinds all series of Cam-Lok, Posi-Lok and Roughneck Connectors.

Tools Required to vulcanize connectors to cable

• Vulcanizing Press
• Com-A-Long
• Vulcanizing Tape
• Copper Shims
• Spray Lube
• Connector Maintenance Kit